BANTAM E-STATION BC8 Balance Charger 1-8 Lipo Cells

Home > Chargers >

Our Price: $269.90

Product Code: ECHBC8

Description

Specification

Operating voltage
DC 11~18 volts

Idling current
approx. 100mA

Charge/discharge power
max. 150/30W

NiCd/MH
1~27 cells

LiIo/LiPo/LiFe
1~8 series

Pb
2~36V

Charge current
0.1 to 7.0A

Discharg current
0.1 to 5.0A

No. of cycle
1 to 5 times

Battery data memory
up to 10 data

Weight
1000g

Dimension
160x120x40 mm

User's setting-up parameters

Lithium battery voltage type
LiIo:3.6V, LiPo:3.7V, LiFe:3.3V

NiCd Delta-peak voltage sensitivity
1 to 20mV

NiMH Delta-peak voltage sensitivity
1 to 20mV

Battery temperature cut-off
20 to 80C or OFF

Waste time between charge/discharge
1 to 60 min.

Trickle charge mode
ON/OFF, up to 200mA

Integral timer limit for safety
10 to 720 min.or OFF

Maximum charging capacity limit for safety
10 to 9990mAh or OFF

Key beep and buzzer sound
ON/OFF

Input power low alert
10 to 11V

LCD back-light brightness
1 to 100 steps

Optimized operating software

When charging or discharging, BC8 has an 'AUTO' function that sets the feeding current or the cell count of Lithium battery automatically. Especially for Lithium batteries, it can prevent the over-charging can lead to an explosion by users fault. Every program in the unit is controlled with mutual links and communication for every possible error so it introduces a maximum safety. These can be set at users option.

- High-power and high-performance circuit

BC8 employs the circuit that has maximum output power of 150W. As a result it can charge or discharge up to 27 cells of NiCd/NiMH and 8 series of Lithium batteries with maximum current of 7.0A. Furthermore the cooling system is so efficient that can hold such a power without any trouble of running the circuit or the operating program.

- Individual voltage balancer for Lithium batteries inside

BC8 has an individual-cell-voltage balancer inside. So it does not need any balancer separately when charging Lithium batteries (LiIo/LiPo/LiFe) for cell voltage balancing.

- Balance individual cells on discharge

BC8 also can monitor and balance individual cells of the Lithium battery pack during the discharge process. If the voltage of any one cell varies abnormally, the process will be stopped with the error message.

- Accept various types of Lithium battery

BC8 can accept three types of Lithium batteries - LiIo, LiPo and LiFe. They have different characteristics by their chemistry. You can select any one of them that you are going to process before the job.

- Lithium battery 'Fast' and 'Storage' mode

You can charge Lithium battery for special purposes. 'Fast' charge reduces the charging time of Lithium battery and 'Storage mode controls the final voltage of the battery to be suit for long time storage.

- Data store/load

For users convenience it can store maximum 10 data of different batteries. You can establish the data contains program setting of the battery to charge or discharge continually. These data can be called out at any time you need and the process can be executed without program setting.

- Cyclic charging/discharging

Perform 1 to 5 cycles of charge>discharge or discharge>charge continually for battery refreshing and balancing.

- PC based analysis using USB communication

For technical expert, BC8 offers PC based program can analysis the characteristic of the battery by USB port. It shows a graph of voltage, current, capacity and temperature curves. It also shows the individual voltage of each cell in the Lithium battery pack.

- Back-light LCD screen

You can adjust the brightness of LCD display

- Robust outer aluminum case

High-quality aluminum case is durable and very efficient to cool out the internal heat