BANTAM E-STATION BC6 Balance Charger 1-6 Lipo Cells (NEW Version)

Home > Chargers >

Our Price: $139.00
Sale Price: $119.00
You Save $20.00

Product Code: ECHBC6

Description

Operating voltage
DC 11~18 volts

AC 100~240V, 50/60Hz

Charge/discharge power
max. 50/5 Watts

- Dual input power

BC6 employs the circuit that can be operated with the input power of AC(Alternating Current) or DC(Direct Current). For AC input, it contains a AC-DC switching power supplier which has 5A of power capacity and maximum output power of 50Watts for charging. As a result it can charge up to 15 cells of NiCd/NiMH and 6 series of Lithium batteries with maximum current of 5.0A.

- Individual voltage balancer for Lithium batteries inside

BC6 has an individual-cell-voltage balancer inside. So it does not need any balancer separately when charging Lithium batteries (LiIo/LiPo/LiFe) for cell voltage balancing.

Balance individual cells on discharge

BC6 also can monitor and balance individual cells of the Lithium battery pack during the discharge process. If the voltage of any one cell varies abnormally, the process will be stopped with the error message.

- Accept various types of Lithium battery

BC6 can accept three types of Lithium batteries - LiIo, LiPo and LiFe. They have different characteristics by their chemistry. You can select any one of them that you are going to process before the job.

- Lithium battery 'Fast' and 'Storage' mode

You can charge Lithium battery for special purposes. 'Fast' charge reduces the charging time of Lithium battery and 'Storage mode controls the final voltage of the battery to be suit for long time storage.

- Data store/load

For users convenience it can store maximum 5 data of different batteries. You can establish the data contains program setting of the battery to charge or discharge continually. These data can be called out at any time you need and the process can be executed without program setting.

- Cyclic charging/discharging

Perform 1 to 5 cycles of charge>discharge or discharge>charge continually for battery refreshing and balancing.

- PC based analysis using USB communication

For technical expert, BC6 offers PC based program can analysis the characteristic of the battery by USB port. It shows a graph of voltage, current, capacity and temperature curves. It also shows the individual voltage of each cell in the Lithium battery pack.

NiCd/MH
1~15 cells

LiIo/LiPo/LiFe
1~6 series

Pb
2~20V

Charge current
0.1 to 5.0A

Discharg current
0.1 to 1.0A

No. of cycle
1 to 5 times

Battery data memory
up to 5 data

Weight
960g

Dimension
160x120x40 mm

User's setting-up parameters

Lithium battery voltage type
LiIo:3.6V, LiPo:3.7V, LiFe:3.3V

NiCd Delta-peak voltage sensitivity
1 to 20mV

NiMH Delta-peak voltage sensitivity
1 to 20mV

Battery temperature cut-off
20 to 80C or OFF

Waste time between charge/discharge
1 to 60 min.

Integral timer limit for safety
10 to 720 min.or OFF

Maximum charging capacity limit for safety
10 to 9990mAh or OFF

Key beep and buzzer sound
ON/OFF

Input DC power low alert
10 to 11V