Home > Chargers >   BANTAM E-STATION 902 Smart Charger 1-12 Lipo Cells
	Our Price: $299.99 Product Code: ECH-902

Description   Specification Operating voltage DC 11~18 volts Idling current approx. 100mA Charge/discharge power max. 200/50W NiCd/MH cell count 1~32 cells Li-ion/polymer 1~12 series Pb 2~ 24V Charge current 0.1 to 9.9A Discharge current 0.1 to 9.9A No. of cycles 1 to 5 times Battery data memories up to 10 data OUTPUT-2 1~8 cells NiCd/MH (0.1~2.0A) External load R: 1 or 2 Ohms Motor Driver max. 20A load Weight 1050g Dimension 160x148x60 mm User's setting-up parameters Lithium battery voltage type 3.6 or 3.7 volt a cell NiCd Delta-peak voltage sensitivity 1 to 15mV NiMH Delta-peak voltage sensitivity 1 to 15mV Battery temperature cut-off 20 to 80C or OFF Waste time between charge/discharge 1 to 60 min. Trickle charge mode ON/OFF Integral timer limit for safety 10 to 720 min.or OFF Maximum charging capacity limit for safety 10 to 9990mAh or OFF Key beep and buzzer sound ON/OFF Input power low alert 10 to 11V LCD back-light brightness 10 to 100 % - High-power and high-performance circuit 902 employs the circuit that has maximum output power of 200W. As a result it can charge or discharge up to 32 cells of NiCd/NiMH and 12 series of Lithium batteries with maximum current of 9.9A. Furthermore the cooling system is so efficient that can hold such a power without any trouble of the circuit or the operating programs. If you need more power to discharge the battery of high voltage with high current you can link an external discharge module (ELD150) that is sold separately to the unit. - Optimized operating software When charging or discharging, 902 has an 'AUTO' function that set the feeding current or the cell count of Lithium battery automatically. Especially for Lithium batteries, it can prevent the over-charging can lead to an explosion by users fault. Every program in the unit is controlled with mutual links and communicates for every possible error. So it introduces a maximum safety. These can be set at users option. - 'OUTPUT-2' The 'OUTPUT-2' can charge NiCd or NiMH battery up to 6 cells with 'OUTPUT-1' simultaneously. It employs the delta-peak voltage detection method not the trickle charge and is independently operated from 'OUTPUT-1'. Do not try to charge Lithium battery at OUTPUT-2. - Accept various types of Lithium battery 902 can accept three types of Lithium batteries - LiIo, LiPo and LiFe. They have different characteristics by their chemistry. You can select any one of them that you are going to process before the job. - PWM Motor driver You can easily break-in or test the motor at 'OUTPUT-1' with a variable feeding voltage, and running time. And also you can check the output power and the consumption of electric current of the motor at real time. - Lithium 'Fast'/'Storage' mode charge You can charge Lithium batteries for special purposes. 'Fast' charge reduces the charging time of Lithium battery and 'Storage mode controls the final voltage of battery to be suit for long time storage. - Monitoring the voltage of individual cell Unbalance of the voltage of each cell can occur in the Lithium battery pack because of consecutive charge and discharge. Using 'Lithium balancer(PB5 or PB6)', the charger monitors the voltage of each cell and controls the charge and discharge current to equalize the voltage. For this process the charger communicates with the external balancer thru the temperature sensor port. - Battery data store/load For users convenience it can store maximum 10 data of battery. You can establish the data contains program setting of the battery to be charged or discharged continually. These data can be called out at any time you need and executed without program setting. - Cyclic charging/discharging Perform 1 to 5 cycles of charge>discharge or discharge>charge continually for battery refreshing and balancing. - PC based analysis using USB communication For technical expert, 902 offers PC based software can analysis the characteristic of the battery using USB port. It shows a graph of voltage, current, capacity and temperature curves. - Back-light LCD screen You can adjust the brightness of LCD display - Robust outer aluminum case High-quality aluminum case is durable and very efficient to cool out the internal heat

Related Products... TP Balancer to Align Battery 2-6S Converter Board Our Price: $59.00 Add TP Balancer to Align Battery 2-6S Converter Board Our Price: $6.50 Add Electrifly 1-5cell Triton2 DC Computer Charger V2 Our Price: $139.99 Add Bantam Adapter - ALIGN Style Our Price: $6.95 Add Hyperion EOS 1210i 12S 30N CHARGER Our Price: $159.99 Add

 Share your knowledge of this product with other customers... Be the first to write a review.

Browse for more products in the same category as this item: Chargers

	OUTRAGE NRG 6S1P 22.2V 3000mAH 25C - XTREME POWER SERIES/ T-REX-500 - 2 Pack $240.00
	Align Tail Linkage Rod HS1271 $3.99
	KRG5002 OUTRAGE G5 kit /CF w/FG blades $399.95